Martindale VIPD150-S Voltage Indicator & Proving Device Kit
Nothing is more dangerous than trusting a defective voltage indicator to test for a dead circuit. Safe electrical work requires the use of a voltage indicator that has been proved with a proving device before and after use.
The Martindale VIPD150 contains the VI-15000 voltage indicator and the PD690 proving device, enabling you to comply with health and safety recommendations for safe working.
The new VI15000 has a 1000V CATIV safety rating and LED indication for AC/DC voltages from 50V to 690V and above, ensuring compliance with health and safety recommendations for safe working in all BS EN61010 installation categories. It�s the simplest and most reliable way to ensure circuits have been de-energised and properly isolated prior to maintenance and modifications. Based on the industry endorsed VI3800, the new CATIV design not only provides improved protection against voltage transients, but also includes a high wattage resistor that will limit the current in the event of damage to the cable in accordance with BS EN61243-3. The protection is built in where it�s needed, in the handheld probe assembly rather than just in the instrument providing superior protection for the user to other testers.
The heavy duty, double insulated cable, large finger guard and a retractable, lockable prod sheath make this the safest, most durable and reliable instrument of its type.
The PD690 proving device produces 700V AC/DC to enable voltage indicators and other devices with ranges up to 700V to be checked. It is a portable, battery powered proving unit with the option of being driven from a 12V supply via a car or mains power supply. The kit is supplied with a combination carry case for both VI and PD products.
Martindale VI-15000 Voltage Indicator
- Nominal Voltage Range: 50 - 1000V AC / DC
- Nominal Voltage Threshold Indications: 50, 100, 200, 400, 690 V DC/AC rms
- Nominal Voltage threshold tolerance: conforms to BS EN61243-3:2010
- Polarity indication: from approx 12V DC/AC rms
- AC/DC voltage detection: automatic
- Range detection: automatic
- Response time: < 0.1s
- Frequency range: DC, 1 - 400 Hz
- Test current: < 3.5mA at 1000V DC/AC rms
- Duty ratio: 30s ON (operated) / 240s OFF (recovery)
Environmental
- Temperature & Humidity (operating & storage): -10�C to 55�C ? 85% R.H.
- Altitude: up to 2000m Pollution degree 2
- IP rating: IP54 /li>
General
- Power: from circuit under test
- Dimensions: 205(L) x 67(W) x 27(D) mm
- Weight: 130g approx.
- Includes: instructions
Safety
- Conforms to BS EN 61243-3:2010 CAT IV 1000V
- Class II, Double Insulation
- Pollution Degree: 2
- EMC: Conforms to BS EN 61326-1
