Martindale Drummond MTL15PD-S Test Lamp & Proving Unit
Safe electrical work requires the use of a voltage indicator that has been proved with a proving device before and after use.
Four illumination bands up to 690V
1000V CAT IV safety rating
Right angled & straight GS38 compliant probes
High intensity long life LED indication
360� viewing angle
The John Drummond MTL15 has a maximum working voltage of 1000V DC/AC rms and extended nominal voltage threshold indications of 50, 230, 400, 690C DC/AC rms. The CAT IV 1000V safety rating makes the MTL15 suitable for supply side applications in all installation categories as defined in BS EN 61010.
The robust design meets the recommendations of the Health and Safety Executive in their guidance notes on the electrician�s test lamp (GS38) as well as complying with the most recent changes to the voltage detector standard BS EN 61243-3 and the test equipment safety standard BS EN 61010.
Both the lamp housing and the probe have a finger shield and insulated probe tip with only 4mm of exposed metal. A two layer double insulated cable with white inner insulation gives a clear warning of abrasion that could compromise the user�s safety, and is resistant against heat and oil. The MTL Series of test lamps do not require batteries and have no ranges or switches to get wrong, ensuring reliable indication of hazardous voltages.
The MTL15 is supplied with six interchangeable test probes for safe and easy measurement in all types of application particularly where access is restricted. In addition to the standard 62mm straight and right angled probe, extended 130mm probes are included. For maximum ease of use, the right angled probes can be rotated through 90, 180 and 270 degrees and locked in position.
High intensity LEDs show four distinct bands of illumination for the different voltage thresholds up to 690V. The unique design provides a 360� viewing angle, even in bright sunlight. This allows reliable identification of potentially lethal voltages above 50V and enables the user to easily distinguish source voltages of different supply types.
The MTL15 test lamp is the ideal solution for safely proving dead in many high power applications including:
Wind turbines installations
Energy intensive process industries
High power variable speed drives
UPS systems
Includes
MTL15 Test Lamp
PD690S Proving Unit
Carry Case 
Maximum Working Voltage
500V AC, 750V DC
Voltage Ranges
50, 100, 200, 400V AC / DC
Range Detection
Automatic
Response Time
<0.1s
Frequency Range
DC, 0-65Hz
Test Current (500V AC / DC)
<3.5mA
General Specifications
Temperature Range: -10�C to +55�C
Measurement Category: CAT IV 600V, CAT III 1000V
Pollution Degree: 2
Protection Degree: IP64
Dimensions: 213 x 112 x 72mm
Weight: 320g approx