Fluke has updated the T130 Two-Pole Voltage and Continuity Tester to include the following: 
Improved safety features, including a CableHealth function (see below)
Cable able to withstand 5000 bend cycles in both directions to 150, exceeding the EN 61243-3 standard by up to three times (see the video below)
Rugged design: the most durable Fluke Two-Pole Voltage Testers to date
 
NEW CableHealth Function
This function is designed to ensure the safety and reliability of the Fluke T130 Two-Pole Voltage and Continuity Tester. It runs continuously and automatically in the background, requiring zero input from the operator; it checks the soundness and continuity of the Fluke T130 Two-Pole Voltage and Continuity Testers test lead.
 
The CableHealth function will verify the condition of the Fluke T130 Two-Pole Voltage and Continuity Testers test lead before, during, and after measurements. A fault is indicated via the illumination of a red band (the CableHealth indicator); this band will illuminate even if an intermittent fault is detected. When this light is dark, the user knows that the test lead is in good health.
 
The integration of a NEW CableHealth function and indicator into the Fluke T130 Two-Pole Voltage and Continuity Tester ensures that the user is continuously and immediately informed as to the safety and reliability of his/her instrument. It enables electricians to work more safely and reliably.
 
The upgraded version of the T90 and T110, the T130 includes a backlit LCD which shows voltage level as a digital value alongside LED indicators of voltage up to 690V. It also includes a display hold function, allowing the value taken to be temporarily stored on the screen.
 
Highly popular with electricians, the T130 is equipped with GS38-compliant caps and can be used to perform continuity testing (with the ability to switch the buzzer on and off) and also indicates polarity.
Additional functions of this tester include single-pole phase detection, a vibration indicator when under load, and a built-in electrical torch.
 
Fluke T130 Two-Pole Voltage/Continuity Tester Key Features
Dual voltage indicator - LED step lights and built-in backlit LCD screen
Range from 6 to 690V
Continuity test with buzzer (can be switched on/off)
Single pole test for phase indication
Responds in under a second
Can be used even when the batteries are discharged
GS38-compliant probe tips
Low battery indication
Probe docking system for easy storage
WearGuard indicator shows damage to test leads
Data hold function freezes the last value taken on the screen
 
Fluke T-Series Comparison Chart
The following table outlines the difference between each of Fluke's T-series Two-Pole Voltage and Continuity Testers:
 
T90
T110
T130
T150
Voltage AC/DC
 12V - 690V 
 12V - 690V 
 6V - 690V 
6V - 690V
Continuity
0-400k?
Frequency
0/40-400Hz
Phase Rotation
-
100V-690V
Resistance Measurement
-
-
-
 Up to 1999? 
Response Time (LED Indicator)
<0.5s
200k? Input Impedance
Current Draw 3.5mA @ 690V
Current Draw 1.15mA @ 230V
 7k? Input Impedance (with load buttons pressed) 
-
Current draw 30mA @ 230V
Safety Rating
CAT II 690V
 CAT III 600V 
CAT III 690V
 CAT IV 600V 
IP Rating
IP54
IP54
IP64
IP64
Backlit LED indicator
?
?
?
?
Backlit LCD digital display
-
-
LCD
LCD
Continuity test�visual results 
?
?
?
?
Continuity test�audible results
?
? with on/off
? with on/off
? with on/off
Vibratory indicator under load
-
?
?
?
Display hold
-
-
?
?
Voltage test
?
?
?
?
Indication of polarity
?
?
?
?
Resistance measurement
-
-
-
?
Switchable load
-
?
?
?
Single pole test for phase detection
?
?
?
?
Rotary field indicator
-
?
?
?
Probe tip protection
?
?
?
?
Voltage display with discharged batteries
?
?
?
?
Electrical torch function
-
?
?
?
Wear indicator test lead wire
?
?
?
?