What is the maximum test voltage of the Megger EVX100?

The Megger EVX100 supports test voltages up to 500V for accurate electrical insulation testing.

Does the EVX100 include data logging features?

Yes, the EVX100 allows data logging and can export results for compliance and reporting purposes.

Is the Megger EVX100 suitable for professional PAT testing?

Absolutely. The EVX100 is designed for professional technicians and meets all UK PAT testing requirements.

Reading temperature levels in a wide variety of applications doesn't have to be difficult - with the Fluke 62 MAX infrared thermometer, you can get quick, accurate and reliable measurements of surface temperatures without the need to make direct contact.

You can use the Fluke 62 MAX infrared thermometer anywhere; these units are made tough with dust and water resistance as well as ultra-durable casing which can withstand a drop from a height of up to 3m. There's a reason why this thermometer's tagline is 'Handle Without Care' - take a look at the video below to see how useful and durable this infrared (IR) thermometer really is.

Precise, Reliable Non-Contact Temperature Measurements

Making a measurement with the Fluke 62 MAX is simple - just use the built-in precision laser point to determine your measurement point and the thermometer will quickly determine surface temperature with a high degree of accuracy.

There's many benefits to using the Fluke 62 MAX for your temperature measurements, including:

Wide Temperature Measurement Range - the 62 MAX can measure temperature levels in Celsius or Fahrenheit from -30 to 500�C (-22 to 932�F)
Accurate, Reliable Temperature Measurements - �1.5�C or �1.5% of reading typical accuracy
Fast Temperature Measurements - responds with a temperature measurement in under 500ms
10:1 Distance-To-Spot Ratio with Laser Pointer - hold the thermometer approximately 10 inches away for a 1 inch measurement spot
MIN, MAX, AVG and DIF modes - displays the minimum, maximum or average temperature, or the difference between two measurements
Hi and Lo Alrms - rapid indication when measurements are outside limits
Durable Design - IP54 rated for dust and water resistance and rugged enough to withstand drops from a height of 3m
Small, Lightweight Design - clips onto your toolbelt or belt loop, or easily fits in your toolbox
Large Size, Backlit Screen - read your data easily no matter what conditions you find yourself in

Ideal for Any HVAC Application

Reliable temperature measurements go hand-in-hand with HVAC work; thankfully, Fluke's 62 MAX thermometer delivers the accuracy and reliability you need.

This infrared thermometer is suitable for many different HVAC applications, including:

Checking Discharge Air Temperature - easily check the discharge air temperature of an HVAC unit with ceiling discharge while standing on the ground (no ladders needed!)
Check Thermostat Accuracy - put a value on the temperature output of your thermostats and make adjustments as necessary
Check Inlet/Outlet Water Temperatures - non-contact measurements of water inlets and coil outlets are quick and easy with the 62 MAX. Ideal for determining correct water temperatures, heat transfer and valve operation
Check Air Handler Coil Temperatures - specific coil temperatures should be present on these systems; use the 62 MAX to check if it's working like it should
Examine Hot Water Boiler Temperature - see how hot or cold water from a boiler is and identify potential energy saving procedures
Steam Trap Checks - find failed open/closed steam traps and take action
Air Distribution Checks - a room or a space may have several air distribution ducts - with the 62 MAX, you can identify ducts which aren't working or show incorrect temperatures

Upgrade to the 62 MAX+

Why not also consider upgrading to Fluke's 62 MAX+ model instead?

It may look the same as the standard 62 MAX, but the Plus model has even higher accuracy, wider temperature range and a number of other benefits.

This table shows the difference between each.

Function	Fluke 62 MAX	Fluke 62 MAX+
Temperature Range	-30 to 500�C (-22 to 932�F)	-30 to 650�C (-22 to 1202�F)
Accuracy	� 1.5 �C or � 1.5 % of reading � 2.0 at -10 �C to 0 �C � 3.0 at -30 �C to -10 �C	� 1�C or � 1.0 % of reading � 2.0 at -10 �C to 0 �C � 3.0 at -30 �C to -10 �C
Response Time	<500 ms (95 % of reading) Spectral Response: 8 to 14 microns Emissivity: 0.10 to 1.00	<300 ms (95 % of reading) Spectral Response: 8 to 14 microns Emissivity: 0.10 to 1.00
Optical Resolution	10:1 (calculated at 90 % energy)	12:1 (calculated at 90 % energy)
Display Resolution	0.1 �C (0.2 �F)	0.1 �C (0.2 �F)
Repeatability of Readings	� 0.8 % of reading or <� 1.0 �C (2 �F), whichever is greater	� 0.5 % of reading or <� 0.5 �C (1 �F), whichever is greater
Power	AA Battery	AA Battery
Laser Pointer	Single laser	Dual lasers