The Fluke 190-202-III ScopeMeter is a dual-channel handheld oscilloscope with a bandwidth of 200MHz, a 5000-count digital multimeter, and a CAT III 1000V/ CAT IV 600V safety rating.
It is ideal for maintenance managers and consultants working in manufacturing, equipment installation, and field service, and can be used to commission, maintain, install, and troubleshoot industrial machinery, automation and process controls, and power conversion electronics (DC to 500MHz).
In addition to two independent, floating, isolated inputs (up to 1000V), the Fluke 190-202-III ScopeMeter Portable Oscilloscope features a fast sampling rate up to 5.0 GS/s, 200 ps resolution, and a deep memory with the capacity to store up to 10 000 samples per channel. Detailed, accurate waveforms allow you to see noise and other disturbances. Moreover, this oscilloscope includes a range of measurement/ memory functions that can be used to diagnose challenging problems such as complex waveforms, induced noise, intermittent events, and signal fluctuations or drift:
- TrendPlot� Paperless Recorder: enables long-term automatic measurements; this mode plots key values allowing you to identify intermittent faults quickly.
- ScopeRecord mode: this mode stores up to 48 hours of data ensuring you capture fast and intermittent glitches; it saves up to 30 000 points per input channel facilitating low-frequency signal analysis.
- Replay function: automatic capture and replay of up to 100 screens.
- Connect-and-View Triggering: intelligent, automatic triggering on fast, slow, and complex signals.
Additionally, you can take timing- and amplitude-related measurements and conduct frequency spectrum analysis using FFT analysis, as well as compare multiple test points across a circuit.
Waveforms and measurements can be viewed via the Fluke 190-202-III ScopeMeter Portable Oscilloscope�s large, bright, colour display. Data that is saved to its memory may be transferred to a PC via a USB or Wi-Fi interface (FLUKE-190-202-III-S only as a Wi-Fi dongle is required). A drip- and dust-proof, IP51-rated casing with an easy-to-access battery makes the Fluke 190-202-III ScopeMeter Portable Oscilloscope ideal for use on rugged sites.
The Fluke 190-202-III ScopeMeter Portable Oscilloscope is a two-channel, high-performance, durable oscilloscope and digital multimeter.
Fluke 190-202-III ScopeMeter Portable Oscilloscope Key Features
- Dual-channel, high-performance, portable, and rugged oscilloscope
- Bandwidth: 200MHz
- Ideal for troubleshooting, installing, commissioning, and maintaining industrial machinery, automation and process controls, and power conversion electronics (from DC to 500MHz)
- 5000-count digital multimeter
- CAT III 1000V/ CAT IV 600V safety rating
- Ideal for maintenance managers and consultants working in manufacturing, equipment installation, and field service
- Fast sampling rate: up to 5.0 GS/s
- Resolution: 200 ps
- Deep memory: store up to 10 000 samples per channel (in Scope mode)
- Compare multiple test points across a circuit
- Take timing- and amplitude-related measurements
- FFT analysis for frequency spectrum
- Captures accurate, detailed waveforms
- See noise and other disturbances
- Diagnose difficult problems like complex waveforms, induced noise, intermittent events, and signal fluctuations/ drift
- TrendPlot Paperless Recorder
- ScopeRecord mode
- Replay function
- Connect-and-View Triggering
- Large, bright, colour display
- Upload data to a PC via USB or Wi-Fi (FLUKE-190-202-III-S only as a Wi-Fi dongle is required)
- IP51
- Easy-to-access battery
- A two-channel, high-performance, durable oscilloscope and digital multimeter
What�s Included?
- Fluke 190-202-III ScopeMeter Portable Oscilloscope � 2 Channels, 200MHz
- Battery Charger/ Mains Adapter
- BP290 (10.8V, 2500mAh) Li-Ion Battery
- 2x VPS410-x Ruggedised Industrial-Grade Probes (1x Red, 1x Blue)
- Large Jaw Alligator Clips (1x Red, 1x Blue)
- 2x TL175 Test Leads with Test Pins (1x Red, 1x Blue)
- Hangstrap
- Handstrap
- Download Information for User Manual and FlukeView�-2 Demo Package
- USB Interface Cable
- OPTIONAL SCC293 Kit (CXT293 Protective Carry Case, Activation Code for the Full Version of Fluke�s FlukeView Software, and Wi-Fi Dongle)
Kit Comparison
| FLUKE-190-202-III | FLUKE-190-202-III-S | |
| Fluke 190-202-III ScopeMeter | ? | ? |
| Battery Charger/ Mains Adapter | ? | ? |
| BP290 Battery | ? | ? |
| 2x VPS410-x Ruggedised Industrial Grade Probes | ? | ? |
| 2x Large Jaw Alligator Clips (1x Red, 1x Blue) | ? | ? |
| 2x TL175 Test Leads with Test Pins (1x Red, 1x Blue) | ? | ? |
| Hangstrap | ? | ? |
| Handstrap | ? | ? |
| Download Information for User Manual | ? | ? |
| Download Information for FlukeView�-2 Demo Package | ? | ? |
| USB Interface Cable | ? | ? |
| CXT293 Protective Carry Case | ? | ? |
| Activation Code for the Full Version of Fluke�s FlukeView Software | ? | ? |
| Wi-Fi Dongle | ? | ? |
