C.Scope SGA4 Signal Generator 
 
The C.Scope SGA4 is an affordable Signal Generator designed for use alongside a C.Scope CXL4 or C.Scope DXL4 Cable Avoidance Tool. It enables significantly more underground utilities to be detected including street lighting cables.

The simultaneous dual-frequency 33kHz and 131kHz signal output of the Signal Generators is ideal for maximising the number of buried services that can be energised and then detected.
The C.Scope SGA4 Signal Generator can apply the dual frequency signal without direct connection to buried services, using either a Signal Clamp or the simple induction method from ground level, providing a significant improvement in the detection of the smaller diameter or poorly earthed cables.

The C.Scope SGA4 offers three alternative ways to apply a Signal Generator signal:
Direct Connection allows specific pipes or cables to be individually traced, identified and their depths measured. The use of Signal Clamps, Signal Injectors and Direct Connection leads make this mode the most effective method for pinpointing pipes and cables.
If it is difficult or inconvenient to use Direct Connection, then the Wraparound technique can be utilised to successfully energise a street or car park lighting cable.
Induction allows the Signal Generator to induce a detectable and traceable signal to previously unknown, undetected or inaccessible underground metal pipes or cables.
 
The fully adjustable One Watt Power Output of the C.Scope SGA4 means that deeper and less conducting pipes and cables can be effectively energised and then traced over ever longer distances.
It also features a two position power levels so the operator has some control of how much power is in use and when.

A Pulsed or Continuous signal output allows operators to switch to the Pulsed Mode at the push of a button in high interference situations and keep on tracing. The C.Scope SGA4 has a clear audible signal output to indicate when it is in operation.
A useful in-built audio mute control is also included.

The C.Scope SGA4s twin wall construction is robust and durable. It also provides IP65 standard protection against dust and water ingress.

The C.Scope SGA4 Signal Generator has a large detachable accessory tray as its base. It can house not only the standard accessories but also many of the optional extras such as Signal Clamps, Sondes and Signal Injectors.

The C.Scope SGA4 comes with a three year Warranty (conditions apply). 
 
Features

One Watt Power
Power Levels - 2
Generator Frequencies - 33+131kHz (Connected at 33+131kHz. Induced at 33kHz only.)
Pulsed / Continuous Output Signal
Signal Connection Modes:
– Direct Connection
– Wraparound
– Induction
In-Built Accessory Tray